Toyota Tacoma Bass Subwoofer Package 4th Generation Tacoma (2024 )

Toyota Tacoma Gen 4 Bass Subwoofer Package 4th Generation Tacoma (2024 ) — Double Cab | The Best Bass Solution for the Most Space-Challenged Tacoma Yet The 4th Generation Toyota Tacoma arrived for 2024 with a redesigned interior, updated platform — and significantly less behind-seat real estate than its predecessor. Space is the enemy of bass in the Gen 4 Tacoma, and generic subwoofer solutions simply don’t cut it. That’s why the experts at Breakers Stereo and Performance — with over 50 years of hands-on car audio experience — developed this purpose-built package around the SoundSkins SSK-P110STA2C: the only vehicle-specific enclosure engineered to work within the tight confines of the 2024 Tacoma Double Cab’s available space. This is not a compromise build. Every component has been selected for maximum performance within the Gen 4 Tacoma’s real-world constraints — from the SoundSkins custom enclosure with its perfectly tuned airspace, to your choice of two premium 10-inch subwoofers, a Memphis Car Audio Power Reference amplifier with bass knob and built-in high-to-low signal converter included, and the Memphis 4GKIT wiring kit for a complete, clean, professional installation. If you own a 2024 or newer Tacoma and want serious bass without sacrificing your truck’s usability, this is the best option on the market. ✅ Vehicle Compatibility: Toyota Tacoma Double Cab — 4th Generation (Gen 4) Model Years: 2024, 2025, 2026 This package is engineered specifically for the 4th Generation Tacoma’s redesigned interior dimensions. It is NOT compatible with Gen 3 (2016–2023) models. See our separate Gen 3 Tacoma Bass Package for those years. What’s Included in the Gen 4 Tacoma Bass Package ✔ SoundSkins SSK-P110STA2C — vehicle-specific single 10″ subwoofer enclosure for 2024 Toyota Tacoma Double Cab ✔ Your choice of Alpine S2-W10D2 10″ subwoofer or Audiomobile GT2 2010 10″ subwoofer ✔ Your choice of Memphis Car Audio PRX400.1v2 (600W @ 1Ω) or Memphis Car Audio PRX800.1v2 (800W @ 1Ω) ✔ Bass knob remote included with both amplifier options — dash-mount bass level control ✔ High-to-low level converter built into both amplifiers — factory head unit integration without a separate adapter ✔ Memphis Car Audio 4GKIT — complete 4-gauge amplifier wiring kit ✔ All supplemental hardware and parts needed to complete the installation Enclosure: SoundSkins SSK-P110STA2C — Vehicle-Specific Single 10″ Subwoofer Enclosure for 2024 Toyota Tacoma Double Cab The SoundSkins SSK-P110STA2C is the centerpiece of this entire package — and the reason it stands apart from every generic bass solution for the 4th Generation Tacoma. SoundSkins, long renowned for their precision-cut vehicle sound deadening, has brought that same engineering discipline to subwoofer enclosures. The SSK-P110STA2C is designed specifically around the 2024 Toyota Tacoma Double Cab’s interior dimensions, utilizing every available cubic inch of airspace while fitting cleanly within the truck’s constrained footprint. The internal volume is precisely tuned for the 10-inch subwoofer drivers in this package — delivering the optimal balance of output, extension, and efficiency that neither a universal box nor a custom-fabricated solution could replicate without significant cost and time. �� 2024 Tacoma Gen 4 Double Cab specific fitment — engineered to the new platform’s interior dimensions, not adapted from Gen 3 �� Full 3/4″ MDF construction — high-grade medium-density fiberboard for maximum panel rigidity, zero resonance, and precise internal volume ��️ Durable bed liner polymer spray finish — SoundSkins’ signature coating protects the exterior from abrasion, moisture, and daily truck use; significantly more durable than standard carpet wrap �� Precision-tuned internal airspace — the perfect volume for the Alpine S2-W10D2 and Audiomobile GT2 2010, maximizing bass output without over- or under-driving either driver ���� Made in the USA — SoundSkins enclosures are manufactured domestically to strict construction tolerances �� SMD TCR-1 Speaker Terminal Cup compatible — upgrade-ready terminal for high-current connections up to 2,000W �� Space-maximizing design — fits the Gen 4 Tacoma’s limited behind-seat or under-seat area without compromising rear passenger space �� The best and only purpose-built solution for the Gen 4 Tacoma — with space this limited, vehicle-specific engineering isn’t optional, it’s essential �� Breakers Stereo Note: The 2024 Gen 4 Tacoma has significantly less available space for audio upgrades than the Gen 3. This SoundSkins enclosure was specifically selected because it is engineered to work within that constraint — not around it. There is no better off-the-shelf box option for this truck. Subwoofer Option A: Alpine S2-W10D2 — 10″ S-Series Dual 2-Ohm Subwoofer The Alpine S2-W10D2 is the dual 2-ohm variant of Alpine’s acclaimed S-Series 10-inch subwoofer — and the ideal pairing with the Memphis PRX400.1v2 amplifier included in this package. The dual 2-ohm voice coil configuration delivers a 1-ohm final load when wired in parallel, perfectly matching the PRX400.1v2’s 1-ohm stability and unlocking its full 600-watt RMS output into a single driver. Alpine’s S-Series engineering is known for delivering tight, musical, articulate bass that sounds exceptional across every genre — from hip-hop and EDM to country, rock, and podcasts. �� 10-inch compact driver — fits the SSK-P110STA2C enclosure with the correct cutout diameter and mounting depth for the Gen 4 Tacoma �� Dual 2-ohm voice coils — wire in parallel for 1Ω (matches PRX400.1v2 at full 600W output) or series for 4Ω (more conservative pairing) ⚡ Built for 600W RMS — handles the full output of the PRX400.1v2 without thermal compression or distortion �� High-energy motor structure — precision-wound voice coil delivers tight, defined bass transients with low distortion �� Vented pole piece — reduces coil turbulence and manages operating temperature for long-term reliability �� Optimized Xmax for S-Series — maximum linear cone excursion for a 10-inch driver without mechanical breakup �� Heavy-duty basket and surround — engineered for the vibrations and temperature cycles of daily truck use �� Alpine S-Series heritage — trusted by professional installers and enthusiasts across the globe ✅ Ideal pairing with PRX400.1v2 — this sub amp combination is the recommended choice for balanced power and clean, musical bass in the Gen 4 Tacoma �� Breakers Stereo Pick: Choose the Alpine S2-W10D2 PRX400.1v2 if you want tight, accurate, musical bass that sounds great at all volume levels — the perfect daily driver pairing. Subwoofer Option B: Audiomobile GT2 2010 — 10″ Low-Profile High-Excursion Subwoofer The Audiomobile GT2 2010 is purpose-engineered for exactly the kind of space-constrained install the 4th Generation Tacoma demands. With a mounting depth of just 4.2 inches, Klippel-verified 11.9mm one-way Xmax, and a design optimized for enclosures as small as 0.40 cubic feet, the GT2 2010 extracts maximum bass output from minimal airspace — making it the ideal choice when the SoundSkins SSK-P110STA2C’s compact internal volume is your operating environment. Pair it with the Memphis PRX800.1v2 for a high-output Gen 4 Tacoma bass system that punches well beyond what the truck’s real estate would suggest is possible. �� 4.2″ shallow mounting depth — engineered for tight-clearance installs including the SoundSkins SSK-P110STA2C Gen 4 Tacoma enclosure �� Klippel-verified 11.9mm one-way Xmax — exceptional linear excursion for a shallow-mount 10-inch driver; produces deep, impactful bass without distortion �� Small-box optimized — performs in enclosures as small as 0.40 cu. ft., ideal for the Gen 4 Tacoma’s compact available space �� Bi-radial-gap motor cooling vent technology — proprietary Audiomobile motor cooling design for sustained high-power operation without heat-related performance loss �� CLS Composite Sandwich cone — lightweight, rigid cone for fast, accurate bass response with minimal resonance �� Premium 25mm SBR rubber surround — long-lasting, controlled excursion with factory-consistent compliance over time �� 6-spoke low-profile powder-coated frame — custom-tooled for the GT2 series with integrated radial venting �� 145mm precision CNC-machined motor — large-diameter magnetic motor provides the force needed for 11.9mm Xmax from a shallow-depth driver ✅ Ideal pairing with PRX800.1v2 — the 3-ohm nominal voice coil presents an approximately 3-ohm load to the amp, delivering a clean ~400W RMS — perfectly matched to the driver’s power handling ⚠️ Impedance Note: The Audiomobile GT2 2010 uses a proprietary 3-ohm nominal voice coil — not a standard 2 or 4-ohm. The Memphis PRX800.1v2 delivers approximately 400W RMS into a 3-ohm load — an ideal power match for this driver. This pairing is confirmed and configured correctly by our installation team. If you are self-installing, contact our team before ordering for wiring guidance. �� Breakers Stereo Pick: Choose the Audiomobile GT2 2010 PRX800.1v2 if you want maximum bass depth and output from the Gen 4 Tacoma’s tight space — this combination delivers the most impressive low-frequency performance this truck can house. Amplifier Option A: Memphis Car Audio PRX400.1v2 — 600 Watt Monoblock Amplifier (1 Ohm Stable) The Memphis Car Audio PRX400.1v2 is part of the Power Reference Series — a redesigned, ultra-compact Class D monoblock built for modern vehicles where installation space is limited but performance expectations are not. Rated at 600 watts RMS at 1 ohm, it’s the ideal amplifier partner for the Alpine S2-W10D2 in this package. Its compact anodized aluminum chassis, concealed top-mounted controls, and blue LED accent lighting make it one of the cleanest-looking small-footprint subwoofer amps available — and its built-in high-to-low level input converter means it integrates with the 2024 Tacoma’s factory audio system without requiring a separate adapter. ⚡ 600W RMS @ 1 ohm — full output matched perfectly to the Alpine S2-W10D2 at 1-ohm parallel wiring �� Class D monoblock — maximum efficiency, minimal heat, ultra-compact footprint for tight Tacoma installs �� Variable low-pass crossover (50–250 Hz) — filter non-bass frequencies and send clean bass signal to your subwoofer �� Subsonic filter (10–50 Hz) — protects your subwoofer from damaging ultra-low frequencies in ported enclosures ��️ Variable bass boost up to 12 dB @ 45 Hz — dial in the low-end punch your Tacoma’s cabin demands �� Wired bass remote knob included — dash-mounted remote for on-the-fly bass level adjustment without touching the amp �� High-to-low level inputs built in — direct integration with the 2024 Tacoma’s factory head unit; no external LOC required for basic signal conversion �� Blue LED accent lighting — concealed acrylic top panel with under-mount LED gives the amp a premium custom appearance ��️ Full protection suite — thermal, short-circuit, and overload protection for long-term reliability �� Dimensions: approx. 7.8″ × 5.7″ × 2.16″ — one of the most compact 600W mono amps available; fits easily in the Gen 4 Tacoma’s tight install space Amplifier Option B: Memphis Car Audio PRX800.1v2 — 800 Watt Monoblock Amplifier (1 Ohm Stable) The Memphis Car Audio PRX800.1v2 is the higher-output Power Reference monoblock — rated at 800 watts RMS at 1 ohm and specifically selected as the amplifier pairing for the Audiomobile GT2 2010 in this package. With the GT2 2010’s 3-ohm nominal impedance, the PRX800.1v2 delivers a real-world output of approximately 400 watts RMS into that load — a textbook-correct power match for the driver’s handling range, ensuring clean, undistorted bass at volume without stressing the subwoofer or the amp. The same Power Reference features — bass knob, high-to-low converter, concealed controls, LED lighting — are all present in this model. ⚡ 800W RMS @ 1 ohm / ~400W RMS into 3-ohm GT2 2010 load — purpose-matched output for the Audiomobile GT2 2010 subwoofer �� Class D monoblock — high-efficiency design runs cool even when pushed hard in a small install space �� Variable low-pass filter (50–250 Hz) — precision bass signal targeting for clean low-frequency output �� Subsonic filter (10–50 Hz) — protects drivers in compact ported enclosures from over-excursion at ultra-low frequencies ��️ Variable bass boost up to 12 dB @ 45 Hz — sculpt your low end to match the 2024 Tacoma’s cabin acoustics �� Wired bass remote knob included — adjust bass output from the driver’s seat without reaching for the amp �� High-to-low level inputs built in — integrates with 2024 Tacoma factory audio systems including JBL-equipped trims without a separate adapter for basic installs �� Blue LED accent lighting with acrylic top panel — premium look that complements the Tacoma’s interior aesthetic ��️ Full protection circuitry — thermal, short-circuit, and overload protection �� Dimensions: approx. 7.8″ × 5.7″ × 2.16″ — same ultra-compact chassis as the PRX400.1v2; fits identically in tight Tacoma install locations Memphis Car Audio 4GKIT — Complete 4-Gauge Amplifier Wiring Kit The Memphis Car Audio 4GKIT is brand-matched to both PRX amplifier options in this package — engineered to carry the current demands of either the PRX400.1v2 or PRX800.1v2 without voltage drop, heat buildup, or installation shortcuts. Everything needed from the battery terminal to the amplifier is included. �� 4-gauge OFC power and ground wire — oxygen-free copper, high strand count for maximum conductivity and routing flexibility through the Tacoma’s firewall �� In-line ANL fuse holder with fuse — battery-end protection against short-circuit damage to the vehicle’s electrical system �� Shielded RCA signal cables — noise-free signal transfer from head unit or factory radio to amplifier �� Remote turn-on wire — reliable 12V trigger wire for clean amp activation �� Split loom and installation hardware — professional wire management for a clean, rattle-free route through the 2024 Tacoma’s tight underfloor and firewall areas ✅ Brand-matched to Memphis PRX amps — correct gauge and fuse ratings for both amplifier options; no guesswork �� Complete from battery to amp — everything needed; no extra wiring trips to the parts store Why This Is the Best Bass Solution for the 2024 Toyota Tacoma The 4th Generation Tacoma’s redesigned interior created a new challenge for car audio installers: less usable space than any previous Tacoma generation. Most aftermarket subwoofer solutions — universal boxes, carry-over Gen 3 enclosures, DIY builds — don’t account for the Gen 4’s specific dimensions and end up either not fitting, sounding compromised, or consuming seating space. ✔ The SoundSkins SSK-P110STA2C is engineered for the exact Gen 4 interior — not adapted from a previous year ✔ Both subwoofer options are low-profile, small-box-optimized drivers — chosen specifically because standard-depth subs don’t work in this enclosure ✔ Both Memphis amplifiers are ultra-compact Class D monoblocks — physically small enough to install alongside the enclosure without fighting for space ✔ High-to-low converters are built into both amps — no external adapter needed for factory head unit integration ✔ Bass knob included with both amps — easy driver-seat volume control without reaching for the amp ✔ 50 years of install expertise at Breakers Stereo means every component choice is backed by real-world experience, not just spec sheets Breakers Stereo and Performance — Over 50 Years of Expertise We’ve been building car audio systems longer than most Tacoma owners have been alive. Our team has hands-on experience with the Gen 4 Tacoma platform and has evaluated every available enclosure, driver, and amplifier option for this truck. This package is not a random collection of parts — it’s a curated, field-tested, acoustically matched system that our technicians stand behind with professional installation available at our Oxnard, California shop. �� 50 years in the car audio industry �� 4th Gen Tacoma specific knowledge — we’ve evaluated this platform firsthand ��️ Authorized dealer for Alpine, Memphis Car Audio, Audiomobile, and SoundSkins ��️ Professional installation available in Oxnard, CA �� Real expert support — call or visit us for personalized system advice Frequently Asked Questions — 2024 Toyota Tacoma Bass Package What is the best subwoofer package for a 2024 Toyota Tacoma? This package built around the SoundSkins SSK-P110STA2C enclosure is widely considered the best available solution for the 4th Generation Tacoma due to its vehicle-specific fitment and perfectly tuned internal airspace. The Gen 4 Tacoma has significantly less space than its predecessor, making vehicle-specific engineering a requirement rather than a preference. What generation is the 2024 Toyota Tacoma? The 2024 Toyota Tacoma is the 4th Generation (Gen 4), which debuted for the 2024 model year with a completely redesigned platform, new interior, and updated dimensions. The 3rd Generation (Gen 3) ran from 2016 through 2023. This package is for Gen 4 (2024 ) only. Which amp and sub combination should I choose? If you want balanced, musical bass for everyday listening — Alpine S2-W10D2 PRX400.1v2 (600W @ 1Ω). If you want maximum output and the deepest, most impactful bass possible from the Gen 4 Tacoma’s available space — Audiomobile GT2 2010 PRX800.1v2 (~400W @ 3Ω). Both are excellent systems; the choice comes down to your listening priorities. Do I need an external LOC (line output converter) for my 2024 Tacoma’s factory radio? No — both Memphis PRX amplifiers in this package include built-in high-to-low level inputs, which allow the amp to accept speaker-level signal from the factory head unit directly. For Tacomas equipped with the JBL premium audio system, additional DSP integration may be recommended for optimal signal quality — ask our team about the right integration method for your specific trim level. Will this package fit a 2025 Toyota Tacoma? Yes. The 2025 Tacoma is the same 4th generation platform as the 2024 model. The SoundSkins SSK-P110STA2C enclosure and all components in this package are confirmed for 2024 and 2025 model years, and are expected to carry forward for the duration of the Gen 4 production run. Can I use a larger subwoofer like a 12-inch in the Gen 4 Tacoma? The limited space in the 4th Generation Tacoma makes a 12-inch subwoofer extremely difficult to package without compromising seating or requiring custom fabrication. The 10-inch drivers in this package, paired with the precision-tuned SoundSkins SSK-P110STA2C enclosure, deliver performance that rivals larger drivers in other installations — making them the smarter and more practical choice for this vehicle. Get the Most Out of Your 2024 Tacoma’s Bass Choose your subwoofer and amplifier combination above, or contact the team at Breakers Stereo and Performance for a personalized recommendation. With over 50 years of expertise and real Gen 4 Tacoma install experience, we’ll build you the best bass system this truck can hold. �� Call or Visit Breakers Stereo and Performance — Oxnard, California