Toyota Tacoma Bass Subwoofer Package 3rd Generation Tacoma (2016–2023)

Toyota Tacoma Bass Subwoofer Package 3rd Generation Tacoma (2016–2023) — Double Cab | Behind-Seat Fitment The 3rd Generation Toyota Tacoma is one of the best-selling mid-size trucks on the road — and its Double Cab configuration offers just enough behind-seat real estate to build a serious bass system without sacrificing your cargo space or rear seating. This complete Toyota Tacoma subwoofer package was hand-selected by the certified audio experts at Breakers Stereo and Performance — a shop with over 50 years in the car audio industry — to deliver the deepest, cleanest bass possible from a clean, stealthy, truck-friendly install. Every component in this kit is purpose-chosen for the Tacoma Gen 3 platform: the vehicle-specific behind-seat enclosure uses the exact cab dimensions of the 2016–2023 Double Cab to maximize usable airspace without bulk. Pair that with your choice of two premium 10-inch subwoofer sets, the proven Memphis Car Audio PRX1000.1v2 monoblock amplifier, and a complete Memphis 4GKIT wiring kit, and you have a turnkey bass solution that installs cleanly and sounds like it belongs there. ✅ Vehicle Compatibility: Toyota Tacoma Double Cab — 3rd Generation (Gen 3) Model Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 This package is designed for the Double Cab (Crew Cab) configuration only. Access Cab fitment may vary — contact our team before ordering. What’s Included in the Tacoma Bass Package ✔ Your choice of Alpine S2-W10D4 10″ subwoofers or Audiomobile GT2 2010 10″ subwoofers (sold as a set) ✔ Vehicle-specific behind-seat enclosure — engineered for the 2016–2023 Toyota Tacoma Double Cab ✔ Memphis Car Audio PRX1000.1v2 — 1,000 watt monoblock amplifier (1-ohm stable) ✔ Memphis Car Audio 4GKIT — complete 4-gauge amplifier wiring kit ✔ All supplemental hardware and parts needed for a complete professional installation Subwoofer Option A: Alpine S2-W10D4 — 10″ S-Series Dual 4-Ohm Subwoofer The Alpine S2-W10D4 is part of Alpine’s proven S-Series lineup — designed for drivers who want punchy, accurate, high-SPL bass from a compact 10-inch driver. Alpine has built a decades-long reputation for engineering subwoofers that deliver clean, dynamic low-frequency output across a wide range of enclosure types, and the S2-W10D4 is no exception. Its dual 4-ohm voice coil wiring flexibility makes it an ideal match with the Memphis PRX1000.1v2 amplifier included in this package. �� 10-inch driver — compact profile fits the behind-seat Tacoma enclosure cleanly �� Dual 4-ohm voice coils — wire two subs in parallel for a 2Ω load, or series for 8Ω; maximum amplifier compatibility ⚡ High power handling — built to run hard with the PRX1000.1v2’s 1,000W output �� High-energy motor structure — precision-wound voice coil delivers tight, defined bass with low distortion �� Vented pole piece — reduces coil turbulence noise and manages heat for extended listening sessions �� Optimized Xmax — maximum linear excursion for a 10-inch driver without breakup or distortion �� Rugged basket and surround — built to handle the vibrations and temperature extremes of daily truck use �� Alpine S-Series pedigree — a trusted nameplate among professional installers and enthusiasts worldwide ✅ Sold as a matched set — pre-selected to perform optimally in the Toyota Tacoma vehicle-specific enclosure �� Breakers Stereo Pick: The Alpine S2-W10D4 is the ideal choice if you want tight, musical bass with excellent transient response — great for rock, country, hip-hop, and podcasts alike. Subwoofer Option B: Audiomobile GT2 2010 — 10″ Low-Profile High-Excursion Subwoofer The Audiomobile GT2 2010 is one of the most technically impressive low-profile 10-inch subwoofers available for real-world vehicle installs. Built around a Klippel-verified 11.9mm one-way Xmax — exceptionally long for a shallow-mount driver — the GT2 2010 is engineered to perform in small vented enclosures as compact as 0.40 cubic feet. That makes it a natural fit for the tight behind-seat airspace in the Tacoma Double Cab. The GT2 2010 is part of Audiomobile’s “2K” series, featuring proprietary bi-radial-gap motor cooling technology and a CLS Composite Sandwich cone for maximum output and durability from a driver that mounts in just 4.2 inches of depth. �� 4.2″ shallow mounting depth — engineered specifically for space-constrained installs like the Tacoma behind-seat enclosure �� Klippel-verified 11.9mm one-way Xmax — one of the longest excursion ratings available in a low-profile 10-inch subwoofer �� Small-box optimized — performs in vented enclosures as small as 0.40 cu. ft., unlocking serious output from tight airspace �� Bi-radial-gap motor cooling vent technology — actively manages heat generated by the motor during extended high-power use �� CLS Composite Sandwich cone — lightweight, rigid cone construction for fast, accurate bass response with minimal cone breakup �� Premium SBR rubber surround — 25mm surround with long-term durability and controlled excursion �� 6-spoke low-profile powder-coated frame — custom-tooled for the GT2 series with integrated radial venting for thermal efficiency �� 8″ flat spider with in-line lead wires — engineered for over 2 inches of peak-to-peak excursion with low distortion �� 145mm precision CNC-machined motor — large-diameter motor delivers the magnetic force needed for high Xmax performance ✅ Sold as a matched set — selected by Breakers Stereo experts for compatibility with the Tacoma enclosure and PRX1000.1v2 amplifier ⚠️ Impedance Note: The Audiomobile GT2 2010 uses a 3-ohm nominal voice coil — not the standard 4-ohm found on most aftermarket subwoofers. When two GT2 2010s are wired in parallel, the resulting load is approximately 1.5 ohms, which falls within the operating range of the 1-ohm stable Memphis PRX1000.1v2. Our team has confirmed this pairing and will configure the wiring correctly as part of your installation. If you have questions about impedance matching, contact us before ordering. �� Breakers Stereo Pick: Choose the Audiomobile GT2 2010 if you want maximum bass output from the tightest possible enclosure — ideal for listeners who prioritize output, depth, and low-frequency extension. Vehicle-Specific Behind-Seat Subwoofer Enclosure — 2016–2023 Toyota Tacoma Double Cab The biggest enemy of bass performance in a pickup truck is wasted space and a mismatched enclosure. This Toyota Tacoma-specific subwoofer enclosure is engineered to the exact interior dimensions of the 2016–2023 Tacoma Double Cab’s behind-seat cavity — utilizing every available cubic inch of usable airspace while maintaining factory seating position and occupant comfort. Unlike universal boxes, this enclosure is precision-fit to slide into the Tacoma’s behind-seat area cleanly and securely. �� Toyota Tacoma Gen 3 specific fitment — engineered for 2016, 2017, 2018, 2019, 2020, 2021, 2022, and 2023 Double Cab models �� MDF construction — acoustically inert, dense panel material that eliminates resonance and panel flex �� Tuned for behind-seat airspace — enclosure volume and porting (if applicable) optimized for the Tacoma’s available cavity dimensions �� Carpet-wrapped finish — blends seamlessly with the Tacoma’s factory interior for a clean, stealth install �� Space-maximizing profile — preserves full rear seating while delivering a full dual-subwoofer system ✅ Compatible with both subwoofer options — properly sized and ported for the Alpine S2-W10D4 and Audiomobile GT2 2010 �� Drop-in ready — eliminates the need for custom fabrication; installs in a fraction of the time of a scratch-built box Amplifier: Memphis Car Audio PRX1000.1v2 — 1,000 Watt Monoblock Amplifier (1 Ohm Stable) The Memphis Car Audio PRX1000.1v2 is the single amplifier selected to power both subwoofer options in this Tacoma package — chosen because it delivers more than enough headroom for either the Alpine S-Series or Audiomobile GT2 2010 drivers, with the 1-ohm stability needed to cleanly drive both woofers at their combined impedance load. Part of the PRX Series, this Class D monoblock is compact, thermally efficient, and loaded with tuning controls that let you dial in the exact bass response your Tacoma’s cabin acoustics demand. ⚡ 1,000 watts RMS @ 1 ohm — sufficient headroom for either subwoofer set in this package �� Class D monoblock topology — maximum power efficiency, minimal heat, ideal for under-seat or behind-seat installs in the Tacoma �� Variable low-pass crossover — filter out midrange frequencies and send only bass to your subwoofers ��️ Bass boost / EQ controls — tune your system’s low-end response to match the Tacoma’s cabin and your musical preferences �� Remote bass level control compatible — add a dash-mounted knob for on-the-fly volume adjustment without taking your eyes off the road ��️ Built-in protection circuits — thermal, short-circuit, and overload protection for long-term reliability in demanding daily driver use �� Compact footprint — small chassis fits easily under the rear seat or in the Tacoma’s available behind-seat space alongside the enclosure �� 1-ohm stable — handles the ~1.5-ohm load presented by two Audiomobile GT2 2010s wired in parallel, and the 2-ohm load of two Alpine S2-W10D4s in parallel �� Memphis Car Audio — American-founded audio brand with a legacy of high-performance amplifier engineering Memphis Car Audio 4GKIT — Complete 4-Gauge Amplifier Wiring Kit A properly spec’d wiring kit is the foundation of a reliable car audio installation. The Memphis Car Audio 4GKIT is brand-matched to the PRX1000.1v2 amplifier — meaning the wire gauge, fuse rating, and connector hardware are engineered to carry exactly the current the Memphis amp demands without voltage drop, heat buildup, or installation compromise. Everything from battery to amp terminals is covered in this kit. �� 4-gauge power and ground wire — high-strand-count oxygen-free copper (OFC) construction for maximum conductivity and flexibility during routing �� In-line ANL fuse holder with fuse — protects your Tacoma’s electrical system from short-circuit damage at the battery connection �� Shielded RCA signal cables — prevents RF interference and signal noise between head unit and amplifier �� Remote turn-on wire — proper 12V trigger wire for clean, reliable amp activation with your head unit �� Split loom and hardware — professional wire management for a clean, rattle-free installation through the Tacoma’s firewall and under carpeting ✅ Brand-matched to the PRX1000.1v2 — no guessing on wire gauge or fuse ratings; engineered to spec for this exact amplifier �� Everything from battery to amp included — no additional wiring purchases needed for a complete install Why Breakers Stereo and Performance for Your Tacoma Build? Not every car audio shop understands what makes a Toyota Tacoma bass install different from a sedan or full-size truck. The Tacoma’s behind-seat space is finite, its factory sound system integration requires specific signal handling, and the cab acoustics of a mid-size truck respond differently than a full-size. The team at Breakers Stereo and Performance has been building vehicle-specific audio solutions for over 50 years, and every component in this Tacoma package was chosen based on real-world install experience — not just spec sheets. �� 50 years of professional car audio expertise �� Tacoma-specific knowledge — we’ve built dozens of Gen 3 Tacoma systems �� Curated packages — every component selected for compatibility and synergy ��️ Professional installation available in-shop — let our certified technicians handle the build �� Real expert support — call or visit our Oxnard, California location for personalized advice ��️ Authorized dealer for Alpine, Memphis Car Audio, Audiomobile, and more Frequently Asked Questions — Toyota Tacoma Bass Package What is the best subwoofer package for a 3rd gen Toyota Tacoma Double Cab? This package is specifically designed for the 2016–2023 Toyota Tacoma Double Cab (Gen 3). The vehicle-specific behind-seat enclosure maximizes the available space without removing rear seating. Both sub options — the Alpine S2-W10D4 and the Audiomobile GT2 2010 — are excellent choices depending on your bass preference. Alpine delivers tight, musical bass; Audiomobile delivers maximum depth and output from minimal enclosure space. Will this enclosure fit behind the rear seat of my 2020 or 2022 Tacoma? Yes. The 3rd generation Toyota Tacoma maintained a consistent Double Cab interior footprint from 2016 through 2023, so the vehicle-specific enclosure is confirmed for all model years in that range. If your Tacoma has an aftermarket seat, sliding seat mechanism, or non-standard rear floor mats, contact our team to confirm fitment before ordering. Why does the Audiomobile GT2 2010 have a 3-ohm voice coil instead of 4-ohm? The 3-ohm nominal impedance is a proprietary design choice by Audiomobile that allows the GT2 2010 to achieve its unique combination of high excursion and compact motor size. When two GT2 2010s are wired in parallel, the combined load is approximately 1.5 ohms — well within the safe operating range of the Memphis PRX1000.1v2, which is rated down to 1 ohm. Our installers will configure the wiring correctly for you. Does this package include professional installation? Professional installation is available separately at our Oxnard, California shop. All hardware and parts needed for the installation are included in the package. Contact Breakers Stereo and Performance to schedule your build appointment. Will this setup work with my Tacoma’s factory JBL audio system? Yes — with the right signal interface. Tacomas equipped with the factory JBL system use a processed (amplified) signal that requires a line output converter (LOC) or DSP-based integration to work cleanly with an aftermarket amplifier. Our installation team handles this integration as part of our professional install service. If you are self-installing, ask our team about the correct interface module for your specific Tacoma trim level. Can I use this package in a Toyota Tacoma Access Cab? This package is designed and confirmed for the Double Cab (crew cab) configuration. The Access Cab has a different behind-seat space and may require a different enclosure variant. Contact our team before ordering if you have an Access Cab and we’ll help identify the right solution. What year did the 3rd generation Toyota Tacoma start and end? The 3rd generation Toyota Tacoma (Gen 3) was produced from 2016 through 2023. The 4th generation Tacoma debuted for the 2024 model year with updated dimensions and a redesigned interior. This package is confirmed for Gen 3 (2016–2023) only. Ready to Build the Perfect Bass System for Your Tacoma? Select your subwoofer preference above, or reach out to the team at Breakers Stereo and Performance for a personalized recommendation. With 50 years of expertise and real hands-on Toyota Tacoma install experience, we’ll make sure you get exactly the right system — and the right installation. �� Call or Visit Breakers Stereo and Performance — Oxnard, California